Any damage on the teeth surfaces of the sprocket diminishes the life 
of the conveyor chain.
With typical sprockets, considerably worn sprocket teeth were repaired by teeth padding or even the total sprocket was replaced. In both case, repair was pricey and with teeth padding, accuracy was impaired. We designed new sprockets with detachable teeth for independent substitute. This sprocket is extremely rated by our prospects to the dramatic cost savings in cost and time.
Structure
The teeth is usually replaced by two solutions: individual tooth replacement or sectional teeth substitute.
The bolts and nuts made use of for mounting the teeth on for the sprocket are spot-welded to stop loosening.
The respective structures are illustrated about the suitable.
The over photo as well as the prime suitable illustration demonstrate a sprocket for personal tooth replacement. Because the joint face among the replaced teeth plus the sprocket is formed within a special arc, the bonding accuracy is high and also the sprocket strength is enhanced. Moreover, since the load acting on the mounting bolts is decreased, there may be less likelihood of loosening. This sprocket development is patented.
There are actually two types of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilized for big sprockets receiving hefty loads and welded sheet steel hubs for other applications.
DK Detachable Teeth Sprockets
Tags: