DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
Basic Description
This electrical power unit includes a power up electrical power down circuit with load holding on both A & B ports. A pressure compensatred flow manage is often extra to circuit to control the decent speed in the cylinder.
Distinctive Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned ahead of installation of the power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which should really also be clean and free of impurities. N46 hydraulic oil is encouraged.
four. The electrical power unit needs to be mounted horizontally.
five. Check the oil degree during the tank just after the initial working in the electrical power unit.
6. Oil changing is required just after the preliminary 100 operation hrs, afterwards once each 3000 hours.
DUMP TRAILER Power UNIT- SINGLE ACTING
Standard Description
This energy unit has a energy up gravity down circuit. Start out the motor to lengthen the 
cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve is usually offered if expected. Also a pressure compen sated flow control is usually added to the circuit to regulate the descent speed on the cylinder.
Remark: Please check with our product sales engineer for that distinctive pump displacement, motor power or tank capability.
Specific Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean every one of the hydraulic components concerned just before set up of the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which ought to also be clean and totally free of impurities.N46 hydraulic oil is suggested.
4. The power unit need to be mounted horizontally.
5. Check the oil degree during the tank just after the initial running from the power unit.
six. Oil transforming is needed right after the initial 100 operation hrs, afterwards once each 3000 hours.