Product Description
Product Description
|
Product name |
Taper lock bushing |
||
|
Material |
Steel, Cast iron, Stainless steel |
||
|
Color |
Black, Natural |
||
|
Application |
Accopanying sprocket, V-type pulley, Timing pulley, Gear ect |
||
|
Inspection |
100% |
||
>> INSTALL
1) Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer of dirt. Place bush in hub and match half holes to make comelete holes(each comeplete hole will be threaded on 1 side only).
2) Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.
3) Make sure bush is free in hub. Slip assembly CHINAMFG shaft and locate in the desired position.
4) Tighten screws alternately and evenly until all are pulled up tightly(See table for torque settings)).
5) Hammer agsinst large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. Repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.
>>REMOVE
1) Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.
2) Insert screws into removel holes that are threaded on the bush side. In sizes where washers are found under screws heads, be sure to use these washers.
3) Tighten screws alternately until bush is loosened in hub and then remove the coplete assembly. If bush does not loosen immediately tap on hub.
Packaging & Shipping
Company Profile
ZheJiang Haorongshengye Electrical Equipment Co., Ltd.
1. Was founded in 2008
2. Our Principle:
"Credibility Supremacy, and Customer First"
3. Our Promise:
"High quality products, and Excellent Service"
4. Our Value:
"Being Honesty, Doing the Best, and Long-lasting Development"
5. Our Aim:
"Develop to be a leader in the power transmission parts industry in the world"
|
6.Our services: |
1).Competitive price |
|||
|
2).High quality products |
||||
|
3).OEM service or can customized according to your drawings |
||||
|
4).Reply your inquiry in 24 hours |
||||
|
5).Professional technical team 24 hours online service |
||||
|
6).Provide sample service |
||||
Main products
Machines
Exbihition
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Pulley Sizes: | SPA/Spb/Spc/Spz |
|---|---|
| Manufacturing Process: | Casting |
| Material: | Carbon Steel |
| Surface Treatment: | Polishing |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
| Bore Size: | Demands |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can I get recommendations for taper bushes with anti-corrosion properties?
Yes, there are taper bushes available in the market that offer anti-corrosion properties. These taper bushes are specifically designed to resist corrosion and maintain their functionality and performance in corrosive environments. When selecting taper bushes with anti-corrosion properties, consider the following recommendations:
- Stainless Steel Taper Bushes: Stainless steel is a common material choice for taper bushes that require anti-corrosion properties. Stainless steel contains chromium, which forms a protective oxide layer on the surface, providing excellent resistance against corrosion. Taper bushes made from stainless steel are suitable for applications where exposure to moisture, chemicals, or other corrosive elements is expected.
- Corrosion-Resistant Coatings: Some taper bushes undergo specialized coating processes to enhance their corrosion resistance. These coatings can include materials such as zinc, nickel, or other anti-corrosive substances. The coatings act as a barrier between the taper bush material and the corrosive environment, preventing or minimizing the effects of corrosion. Look for taper bushes that specify corrosion-resistant coatings in their product descriptions or consult with manufacturers for suitable options.
- Polymer Taper Bushes: Certain polymer materials, such as high-performance plastics, offer inherent resistance to corrosion and are suitable for applications where anti-corrosion properties are required. Polymer taper bushes can be lightweight, non-metallic alternatives that provide excellent resistance to various corrosive substances, including chemicals and moisture.
- Sealed or Enclosed Taper Bushes: In some cases, taper bushes are designed with additional features such as seals or enclosures to protect against corrosion. These seals or enclosures help prevent corrosive agents from reaching critical components of the taper bush, ensuring its long-term performance and resistance to corrosion. Look for taper bushes with integrated seals or inquire with manufacturers about options for enhanced corrosion protection.
When seeking taper bushes with anti-corrosion properties, it is essential to consider the specific requirements of your application, including the type of corrosive environment, temperature, and other operating conditions. Additionally, consult with taper bush manufacturers, suppliers, or industry experts who can provide recommendations based on their expertise and product knowledge.
By selecting taper bushes with anti-corrosion properties, you can ensure the longevity and reliability of your equipment in corrosive environments, reducing the need for frequent replacements and maintenance.
Can I find taper bushes suitable for both metric and imperial shaft sizes?
Yes, it is possible to find taper bushes that are suitable for both metric and imperial shaft sizes. Taper bushes are designed to provide compatibility and versatility in power transmission systems, accommodating different shaft measurement systems. Here's how you can find taper bushes suitable for both metric and imperial shaft sizes:
- Dual Measurement Taper Bushes: Some taper bush manufacturers offer dual measurement taper bushes that are specifically designed to accommodate both metric and imperial shaft sizes. These taper bushes have dimensions and tolerances that allow them to fit and secure onto shafts measured in either the metric or imperial system. They provide a convenient solution for applications where both metric and imperial shafts are present, eliminating the need for separate taper bushes for each shaft measurement system.
- Conversion Bushings: Conversion bushings or adapters can be used to bridge the gap between metric and imperial shaft sizes. These bushings typically have different bores on each end, allowing them to connect a metric taper bush to an imperial shaft or vice versa. By using conversion bushings, you can achieve compatibility between taper bushes and shafts measured in different systems, providing a flexible solution for mixed measurement applications.
- Interchangeable Components: Some power transmission systems may utilize interchangeable components that can accommodate both metric and imperial shaft sizes. For example, certain pulleys, sprockets, or gears may have multiple sets of keyways or mounting configurations that can be used with taper bushes for both measurement systems. By selecting these interchangeable components, you can achieve compatibility with different shaft sizes without the need for separate taper bushes.
- Consulting with Suppliers or Manufacturers: If you have specific requirements for taper bushes that can accommodate both metric and imperial shaft sizes, it is advisable to consult with suppliers or manufacturers directly. They can provide guidance and information on the availability of taper bushes suitable for mixed measurement applications. They may also offer customized or special order options to meet your specific needs.
When searching for taper bushes suitable for both metric and imperial shaft sizes, it is important to consider factors such as dimensional compatibility, tolerances, and the specific requirements of your power transmission system. Ensure that the taper bushes you choose are designed to securely fit and provide reliable connections with both metric and imperial shafts.
By exploring the options mentioned above and consulting with industry experts or suppliers, you can find taper bushes that can accommodate both metric and imperial shaft sizes, offering flexibility and compatibility in your power transmission system.
Where can I get information on the key dimensions of taper bushes for compatibility?
If you are looking for information on the key dimensions of taper bushes for compatibility, there are several sources where you can obtain this information. Here are some common places to find the key dimensions of taper bushes:
- Manufacturer's Catalogs and Websites: Taper bush manufacturers often provide detailed catalogs or product listings on their websites. These catalogs typically include comprehensive information about the dimensions, sizes, and specifications of their taper bushes. You can find details such as bore diameter, taper angle, outside diameter, keyway dimensions (if applicable), and overall length. Manufacturer catalogs are valuable resources for understanding the compatibility of taper bushes with different shaft sizes and mating components.
- Engineering Handbooks and Reference Guides: Engineering handbooks and reference guides related to mechanical power transmission or bushing selection may contain information on the key dimensions of taper bushes. These resources are commonly available in libraries, technical bookstores, or online platforms. They provide in-depth knowledge about various types of bushings, including taper bushes, and offer guidance on selecting the appropriate size and dimensions based on shaft requirements.
- Supplier or Distributor Documentation: If you are working with a specific supplier or distributor for taper bushes, they may provide documentation that includes dimensional information. This documentation can be in the form of product datasheets, brochures, or technical specifications. Check with your supplier or distributor to see if they have any resources available that outline the key dimensions of the taper bushes they offer.
- Online Engineering Resources: Online platforms dedicated to mechanical engineering, industrial equipment, or power transmission systems can be excellent sources of information on taper bush dimensions. Websites, forums, or communities focused on mechanical engineering topics often have discussions, articles, or downloadable resources that include dimensional data for taper bushes. Conducting targeted searches using relevant keywords can help you find these online resources.
- Consulting with Industry Experts: If you require specific or detailed information regarding the key dimensions of taper bushes for compatibility, consulting with industry experts or professionals in the field can be beneficial. These experts have practical experience and knowledge about power transmission systems and can provide guidance on selecting the appropriate taper bush dimensions based on your specific application requirements.
When accessing information on the key dimensions of taper bushes, it's important to refer to reliable and trusted sources. Ensure that the information is up-to-date and aligns with industry standards. Double-check any measurements or specifications to ensure accuracy before making final decisions on taper bush compatibility.
By utilizing these various sources, you can gather the necessary information on the key dimensions of taper bushes to determine their compatibility with different shaft sizes and mating components in your power transmission system.
editor by CX 2024-04-04