Product Description
Product Description
|
Product name |
Taper lock bushing |
||
|
Material |
Steel, Cast iron, Stainless steel |
||
|
Color |
Black, Natural |
||
|
Application |
Accopanying sprocket, V-type pulley, Timing pulley, Gear ect |
||
|
Inspection |
100% |
||
>> INSTALL
1) Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer of dirt. Place bush in hub and match half holes to make comelete holes(each comeplete hole will be threaded on 1 side only).
2) Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.
3) Make sure bush is free in hub. Slip assembly CHINAMFG shaft and locate in the desired position.
4) Tighten screws alternately and evenly until all are pulled up tightly(See table for torque settings)).
5) Hammer agsinst large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. Repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.
>>REMOVE
1) Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.
2) Insert screws into removel holes that are threaded on the bush side. In sizes where washers are found under screws heads, be sure to use these washers.
3) Tighten screws alternately until bush is loosened in hub and then remove the coplete assembly. If bush does not loosen immediately tap on hub.
Packaging & Shipping
Company Profile
ZheJiang Haorongshengye Electrical Equipment Co., Ltd.
1. Was founded in 2008
2. Our Principle:
"Credibility Supremacy, and Customer First"
3. Our Promise:
"High quality products, and Excellent Service"
4. Our Value:
"Being Honesty, Doing the Best, and Long-lasting Development"
5. Our Aim:
"Develop to be a leader in the power transmission parts industry in the world"
|
6.Our services: |
1).Competitive price |
|||
|
2).High quality products |
||||
|
3).OEM service or can customized according to your drawings |
||||
|
4).Reply your inquiry in 24 hours |
||||
|
5).Professional technical team 24 hours online service |
||||
|
6).Provide sample service |
||||
Main products
Machines
Exbihition
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | ISO |
|---|---|
| Pulley Sizes: | SPA/Spb/Spc/Spz |
| Manufacturing Process: | Casting |
| Material: | Carbon Steel |
| Surface Treatment: | Polishing |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Where can I find cost-effective taper bushes for agricultural machinery?
When searching for cost-effective taper bushes for agricultural machinery, there are several places where you can explore and find suitable options. Here are some suggestions:
1. Online Industrial Suppliers: Many online industrial suppliers or distributors specialize in providing a wide range of mechanical components, including taper bushes. These suppliers often offer competitive pricing and a variety of taper bush options suitable for agricultural machinery. You can search for reputable online industrial suppliers and browse their catalogs to find cost-effective taper bushes that meet your specific requirements.
2. Agricultural Machinery Dealerships: Local agricultural machinery dealerships or retailers may carry taper bushes or have connections with suppliers who offer such components. Visiting or contacting these dealerships and inquiring about cost-effective taper bushes for agricultural machinery can be a good option. They may have knowledge of affordable options or be able to provide you with contact information for suppliers who specialize in agricultural machinery components.
3. Trade Shows and Exhibitions: Attending trade shows and exhibitions related to agricultural machinery can be an excellent way to explore different suppliers and manufacturers in the industry. These events often feature a wide range of exhibitors showcasing their products, including mechanical components like taper bushes. Engaging with suppliers at these events can help you find cost-effective options and establish direct contacts with manufacturers or distributors.
4. Online Marketplaces: Online marketplaces, such as Amazon, eBay, or specialized industrial marketplaces, can offer a wide selection of taper bushes for agricultural machinery. These platforms allow you to compare prices, read customer reviews, and choose from various sellers, which can help you find cost-effective options. However, it is important to ensure that the sellers on these platforms are reputable and that the taper bushes they offer meet the required quality standards.
5. Local Machine Shops and Fabricators: Local machine shops and fabricators may be able to manufacture custom taper bushes at competitive prices. They can work with you to understand your specific requirements and produce taper bushes tailored to your agricultural machinery. Engaging with local machine shops or fabricators can provide flexibility and cost-effective solutions, especially for unique or specialized applications.
When searching for cost-effective taper bushes, it is essential to consider factors beyond just the price, such as the quality, durability, and compatibility with your agricultural machinery. Ensure that the taper bushes meet the required specifications and standards for your specific application to avoid potential performance issues or premature failures.
By exploring these avenues and considering factors such as price, quality, and compatibility, you can find cost-effective taper bushes for your agricultural machinery that meet your requirements and budget.
Can I find taper bushes suitable for both metric and imperial shaft sizes?
Yes, it is possible to find taper bushes that are suitable for both metric and imperial shaft sizes. Taper bushes are designed to provide compatibility and versatility in power transmission systems, accommodating different shaft measurement systems. Here's how you can find taper bushes suitable for both metric and imperial shaft sizes:
- Dual Measurement Taper Bushes: Some taper bush manufacturers offer dual measurement taper bushes that are specifically designed to accommodate both metric and imperial shaft sizes. These taper bushes have dimensions and tolerances that allow them to fit and secure onto shafts measured in either the metric or imperial system. They provide a convenient solution for applications where both metric and imperial shafts are present, eliminating the need for separate taper bushes for each shaft measurement system.
- Conversion Bushings: Conversion bushings or adapters can be used to bridge the gap between metric and imperial shaft sizes. These bushings typically have different bores on each end, allowing them to connect a metric taper bush to an imperial shaft or vice versa. By using conversion bushings, you can achieve compatibility between taper bushes and shafts measured in different systems, providing a flexible solution for mixed measurement applications.
- Interchangeable Components: Some power transmission systems may utilize interchangeable components that can accommodate both metric and imperial shaft sizes. For example, certain pulleys, sprockets, or gears may have multiple sets of keyways or mounting configurations that can be used with taper bushes for both measurement systems. By selecting these interchangeable components, you can achieve compatibility with different shaft sizes without the need for separate taper bushes.
- Consulting with Suppliers or Manufacturers: If you have specific requirements for taper bushes that can accommodate both metric and imperial shaft sizes, it is advisable to consult with suppliers or manufacturers directly. They can provide guidance and information on the availability of taper bushes suitable for mixed measurement applications. They may also offer customized or special order options to meet your specific needs.
When searching for taper bushes suitable for both metric and imperial shaft sizes, it is important to consider factors such as dimensional compatibility, tolerances, and the specific requirements of your power transmission system. Ensure that the taper bushes you choose are designed to securely fit and provide reliable connections with both metric and imperial shafts.
By exploring the options mentioned above and consulting with industry experts or suppliers, you can find taper bushes that can accommodate both metric and imperial shaft sizes, offering flexibility and compatibility in your power transmission system.
Can I find a guide on installing taper bushes for various shaft sizes?
Yes, you can find guides on installing taper bushes for various shaft sizes. Manufacturers, suppliers, and industry resources often provide detailed installation guides and instructions to ensure proper installation and usage of taper bushes. Here's how you can find a guide on installing taper bushes for different shaft sizes:
- Manufacturer's Websites: Many manufacturers of taper bushes include installation guides and manuals on their websites. Visit the official website of the taper bush manufacturer you are interested in, and look for the "Installation" or "Technical Resources" section. These guides typically provide step-by-step instructions, diagrams, and recommended tightening torque values for different shaft sizes.
- Supplier Documentation: If you are purchasing taper bushes from a supplier or distributor, they may provide installation guides or documentation along with the product. Check the packaging or inquire with the supplier to see if they have any specific instructions or resources available.
- Online Resources and Forums: Online resources, such as engineering forums, mechanical blogs, or industrial websites, often have articles or discussions on the installation of taper bushes. These resources may include practical tips, best practices, and real-life installation experiences shared by professionals in the field. Conduct a search using relevant keywords to find such resources.
- Industry Publications: Industry publications, magazines, or technical journals related to mechanical engineering or industrial equipment may feature articles or guides on taper bush installation. These publications often provide comprehensive information and insights into various mechanical components and their installation procedures. Check both online and offline sources for relevant publications in your field.
- Manufacturer or Supplier Support: If you have specific questions or need assistance with the installation of taper bushes for different shaft sizes, reach out to the manufacturer or supplier directly. They can provide personalized support, clarify any doubts, and guide you through the installation process based on your specific requirements.
When using a guide for installing taper bushes, it's important to follow the instructions provided by the manufacturer or trusted industry sources. Pay attention to details such as proper alignment, recommended lubrication, tightening torque values, and any specific precautions mentioned in the guide. Adhering to the installation guidelines ensures a secure and reliable connection between the taper bush, the shaft, and the mating component.
Always prioritize safety when working with mechanical components. If you are unsure about any aspect of the installation process or encounter difficulties, consult with professionals or seek expert advice to ensure proper installation and minimize the risk of equipment failure or accidents.
editor by CX 2024-02-10